• CL-02



    Epicuro CL-02 is a heavy duty, general purpose hard surface cleaner, containing surfactants and mild solvents that have been formulated for ultimate performance.
  • CL-02

    Epicuro CL-02 is a heavy duty, general purpose hard surface cleaner, containing surfactants and mild solvents that have been formulated for ultimate performance.

CHEMICAL PROPERTIES

Alkaline base

PACKAGING

20 litre containers.

APPLICATION

Apply by paintbrush, roller or HVLP spray unit

  • HEAVY DUTY HARD SURFACE CLEANER. IDEAL FOR CLEANING STONE OR CONCRETE PAVEMENTS

    Epicuro CL-02 is a heavy duty, general purpose hard surface cleaner, containing surfactants and mild solvents that have been formulated for ultimate performance.

    CL-02 represents a major step forward in cleaning technology, out-performing current products that contain hazardous caustic soda which can damage the surface being cleaned. CL02 has no caustic elements and its inbuilt dirt defence technology enables it to lift and suspend contaminants for easy removal.

    CL-02 is the ideal product for regular cleaning and maintenance of all concrete and stone paving.
  • EPICURO-CL02 is a heavy duty general purpose hard surface cleaner, containing surfactants and mild solvents that have been activated for ultimate performance.

    EPICURO-CL02 is a step forward in cleaning technology. EPICURO-CL02 will outperform current products that contain caustic soda, which damages the surface and causes future problems with adhesion & corrosion, for example.

    EPICURO-CL02 does not rely on caustic content, but incorporates alternative dirt defence technology that cleans and suspends dirt with ease.

    EPICURO-CL02 uses include:
    • Pavement and road cleaning
    • Preparation for paintwork.
    • Degreasing surfaces.
    • Industrial cleaning.
    • Cleaning PVC.
    • Light graffiti removal.
    • Removing grout blooms.
    • Cleaning paint spills & brushes.
    • Cleaning cladding and roofs
    • Safer to use.
    • Non caustic.
    • Biodegradable.
    • Cost effective.
    • Multi-use.
    • VOC free.
    • Low odour.
    • Density: 1.08kg/Ltr.
    • Freezing Point: -3° C.
    • Damage if frozen: None.
    • Boiling Point: 98° C.
    • Clean-up substance: Water.
    • Colour: Transparent Cloudy.
    • Odour: Like caustic.
    • Toxicity: None.
    • Flammability: Non-flammable.
    • Fumes in use: None.
    • Environmental hazards: None.
  • SURFACE PREPARATION

    Ensure surface is free of all coatings, coverings or materials that could prevent proper application and penetration of the product.

    Effectively protect all aluminium furniture or fittings, especially when using the product neat or at high concentration (can affect surface). Test the product on the target surfaces before wide scale use, especially if the surface material is unknown (seek advice from Epicuro Ltd). Protect adjoining areas not intended to be cleaned from overspray or spillage.

    APPLICATION

    Light soiling: 1 part— 35 water
    Medium soiling: 1 part— 20 water
    Heavy soiling: 1 part— 5 water
    Extreme soiling: 1 part— 1 water
    Daily cleaner: 1 part— 40 water

    Apply Epicuro CL02 evenly on the surface, by brush or spray and agitate with stiff brush (see dosage guidance). Allow Epicuro CL02 time to work, penetrating the dirt or grease contamination.

    Do not allow product to dry on the surface, top up if necessary.

    The dwell time will depend on the substrate, thickness and type of contamination and the concentration of product used.

    Rinse with high pressure water jet. For best results, use hot water approximately 80° C. Repeat cleaning, possibly altering product concentration and dwell time, to achieve desired result. Again rise and then vacuum up using wet & dry vacuum equipment. Note: in confined spaces, use of a low pressure hose and scrubbing brush should be considered.

    CLEANING EQUIPMENT

    Clean tools and equipment using clean water, immediately following completion of work.
  • ALWAYS KEEP CHEMICALS OUT OF REACH OF CHILDREN AND ANIMALS

    Epicuro CL02 is classed only as an irritant and, therefore, has low health and safety risks. In addition, it is non-corrosive to most surfaces.

    • Eye protection: If there is a real risk of splashing, wear protective goggles.
    • If swallowed: Do not induce vomiting. Contact a doctor or a specialist.
    • Respiratory protection: Under normal conditions of use where adequate ventilation is available, no special respiratory protection equipment is needed.
    • Hand protection: Wear PVC gloves.
    • Skin protection: Wear overalls. No special protective clothing or skin protection is required under normal conditions of use.

    Where required, product users are responsible for preparing their own COSHH Assessments based on the Material Safety Data Sheets provided by Epicuro Ltd. for its products.
  • Coverage of Epicuro CL02 depends on the type of substrate, the nature of it’s contamination and the adopted dilution of the product.

    CONTAMINATION CONCENTRATION
    (%)
    DOSAGE RATE
    (sqm/ltr)
    DWELL TIME
    (mins)
    Heavy 100 (Neat) 2-3 5-10
    Medium 20 2-3 5-10
    Light 10 1-2 1-2
    CONTAMINATION : Heavy
    • CONCENTRATION (%): 100 (Neat)
    • DOSAGE RATE (sqm/ltr): 2-3
    • DWELL TIME (mins): 5-10
    CONTAMINATION : Medium
    • CONCENTRATION (%): 20
    • DOSAGE RATE (sqm/ltr): 2-3
    • DWELL TIME (mins): 5-10
    CONTAMINATION : Light
    • CONCENTRATION (%): 10
    • DOSAGE RATE (sqm/ltr): 1-2
    • DWELL TIME (mins): 1-2
Important: The content of this documentation is based on our experience of the product. Epicuro Ltd guarantees the quality of its products, but expressly declines any liability in the event of failure by the user to comply with the recommendations and conditions of use of said products, notably but not exclusively in the event of incorrect application, application by unqualified personnel, use of products not compatible with Epicuro’s products or bad weather conditions. For further information, refer to the safety data sheet.