PERFORMANCE
Life Expectancy 10 to 15 years
CHEMICAL PROPERTIES
Epoxy resin and hardener
PACKAGING
5kg and 10kg composite kit pack. Available in Grey and Blue.
HEALTH & SAFETY
100% Solids and solvent free
- WRAS APPROVED WATERPROOF COATING FOR POTABLE WATER PROJECTS
E200-PW is a WRAS Approved, two component epoxy coating for Potable Water projects. It is applied by brush, roller or air-less spray. It's a liquid applied coating suitable for waterproofing concrete, stone or steel substrates.
E200-PW is a tough, industrial grade waterproof coating system that, whilst providing excellent resistance to wear and chemicals, is attractive in appearance. It is used for waterproofing tanks, pools and containment bunds.
E200-PW is also used for waterproofing floors, vehicle ramps, loading bays, inspection pits, and production areas where aggressive chemicals are used. It is ideal for commercial and industrial flooring, vehicle maintenance bays, laboratories, showrooms, schools, plant rooms and food and beverage production areas. - E200-PW is a WRAS Approved, two component epoxy coating for Potable Water projects. It is applied by brush, roller or
air-less spray.
E200-PW liquid applied coating is suitable for waterproofing concrete, stone or steel substrates.
E200-PW is a tough, industrial grade waterproof coating system that, whilst providing excellent resistance to wear and chemicals, is attractive in appearance. E200-PW is used for waterproofing tanks, pools and containment bunds.
E200-PW is also used for waterproofing floors, vehicle ramps, loading bays, inspection pits, and production areas where aggressive chemicals are used. It is ideal for commercial and industrial flooring, vehicle maintenance bays, laboratories, showrooms, schools, plant rooms and food and beverage production areas. - Tested to WRAS Standard for Potable Water.
- Excellent resistance against aqueous media including organic acids, aromatic hydrocarbons and some chlorinated hydrocarbons.
- Good resistance to alcohols.
- Attractive gloss finish.
- Hygienic – gives easy to clean surface.
- Good chemical resistance.
- Hard wearing with good abrasion resistance.
- Withstands foot and light vehicular traffic.
- Can be applied to vertical surfaces.
- 100% Solids and solvent free.
- Slip resistant flooring version available with built-in grit.
- Potable Water Application.
- WRAS Tested for potable water applications.
- PREPARATION
In all cases surfaces must be clean, dry, sound and free from oil or other contaminants. Thorough preparation is required to ensure maximum performance. Concrete must be mechanically prepared to remove laitance, loose and friable materials.
New concrete should be at least 21-28 days old and the moisture content less than 5% before application.
MIXING
E200-PW is supplied in pre-weighted packs consisting of Hardener and Resin. Mix full packs, do not attempt to use split packs. Open E200-PW Hardener and E200-PW Resin containers, pour the hardener into resin and mix until a uniform colour is achieved, preferably with the aid of slow electric drill stirrer.
PRIMING
E200-PW is self priming on suitable prepared surfaces. Otherwise, priming is recommended for porous, uneven or friable surfaces. In these circumstances, use E200-PW Primer to prime the substrate before application of E200-PW Apply E200-PW primer at approximately 5 – 6 m² per kg, dependent upon texture and absorbency of the surface. Allow primer to set but leave no longer than 24 hours before applying E200-PW.
PLACEMENT
Application is by brush, roller or airless spray, apply the E200-PW to the prepared surface at rate of 5m² per kilo. Allow E200-PW to set and then apply a second coat of E200-PW. The second coat should be applied within 24 hours of first coat.
SURFACE FINISHES
An anti-skid finish may be achieved by sprinkling BCR Aggregate Dressing onto the first coat while still wet. When the first coat has dried the second coat is applied encapsulating the aggregate grains. Alternatively, an anti-skip coating version of E200-PW can be supplied with frictional grit already incorporated.
It is recommended that a trial panel is applied to ensure that all parties are satisfied with the finish. Anti-slip versions have significantly reduced coverage. Site trials are recommended to determine exact rates.
POT LIFE
Approximately 30 mins at 10° C.
Approximately 15 mins at 20° C.
Approximately 10 mins at 30° C.
CURING
At 20°C open to light traffic after approximately 24 hours.
CLEANING OF EQUIPMENT
Clean tools and mixing equipment immediately after use using Epicuro Cleaning Solvent or Xylene. - ALWAYS KEEP CHEMICALS OUT OF REACH OF CHILDREN AND ANIMALS
- Eye protection: Wear protective goggles.
- If swallowed: Do not induce vomiting. Contact a doctor or a specialist.
- Respiratory protection: Wear a mask and take care not to form dust clouds with the product. no special respiratory protection equipment is needed.
- Hand protection: Wear PVC or rubber gloves.
- Skin protection: Wear full overalls.
- Life expectancy 10 to 15 years for potable water applications, depending on amount of surface abrasion.
Life expectancy for chemical containment projects depends on type and concentration of product
contained. Consult Epicuro Ltd for advice on specific chemical containment requirements.
CONTAMINATION 24 HRS 48HRS 7 DAYS 14 DAYS Hydrochloric Acid 10% Unaffected Unaffected Unaffected Unaffected Nitric Acid 10% Unaffected Unaffected Slight Attacked Slight Attacked Sulphuric Acid 10% Unaffected Unaffected Slight Attacked Slight Attacked Acetic Acid 5% Unaffected Unaffected Unaffected Slight Attacked Lactic Acid Unaffected Unaffected Unaffected Slight Attacked Ammonium Hydroxide 5% Unaffected Unaffected Unaffected Slight Attacked Caustic Soda 30% Unaffected Unaffected Unaffected Unaffected Bleach Unaffected Unaffected Slight Discoloured Slight Attacked Brine Unaffected Unaffected Unaffected Slight Discoloured Sugar Solution Unaffected Unaffected Unaffected Unaffected Detergents Unaffected Unaffected Unaffected Unaffected Hydraulic Fluid (Skydrol) Unaffected Unaffected Unaffected Unaffected Iso Propyl Alcohol Unaffected Unaffected Unaffected Unaffected Lemonade Concentrate Unaffected Unaffected Unaffected Unaffected Water Unaffected Unaffected Unaffected Unaffected Petrol Unaffected Unaffected Unaffected Unaffected ALBA 18 Solution Unaffected Unaffected Unaffected Unaffected CONTAMINATION : Hydrochloric Acid 10%- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Slight Attacked
- 14 DAYS : Slight Attacked
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Slight Attacked
- 14 DAYS : Slight Attacked
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Slight Attacked
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Slight Attacked
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Slight Attacked
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Slight Discoloured
- 14 DAYS : Slight Attacked
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Slight Discoloured
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
- 24 HRS : Unaffected
- 48 HRS : Unaffected
- 7 DAYS : Unaffected
- 14 DAYS : Unaffected
RELATED CASE STUDIES
-
SCOTTISH POWER SUBSTATIONS
Throughout the UK there are 100,000’s of containment bunds. These occur at.... -
EDINBURGH ZOO
Edinburgh Zoo is home to the UK's only Giant Pandas; a female called Tian....
Important: The content of this documentation is based on our experience of the product. Epicuro Ltd guarantees the quality of its products, but expressly declines any liability in the event of failure by the user to comply with the
recommendations and conditions of use of said products, notably but not exclusively in the event of incorrect
application, application by unqualified personnel, use of products not compatible with Epicuro’s products or bad weather conditions. For further information, refer to the safety data sheet.
©
2006 - 2024
Epicuro Protective Materials. All Rights Reserved.