• CL-05



    Epicuro CL-05 is the most advanced, penetrating cleaner currently available that returns stained and soiled granite surfaces to their 'as new' condition.
  • CL-05

    Epicuro CL-05 is the most advanced, penetrating cleaner currently available that returns stained and soiled granite surfaces to their 'as new' condition.

CHEMICAL PROPERTIES

Alkaline base

PACKAGING

20 litre containers.

APPLICATION

Apply by paintbrush, roller or HVLP spray unit

  • POWERFUL GRAITE CLEANER. IDEAL FOR PUBLIC SQUARES, HIGH STREETS AND PARKS

    Epicuro CL-05 is the most advanced, penetrating cleaner currently available that returns stained and soiled granite surfaces to their 'as new' condition. As well as removing general dirt & grime, it is specially formulated to extract extreme or difficult to remove contamination such as oil & diesel fuel from granite and other stone or concrete substrates.

    Epicuro CL-05 is the ideal solution for surfaces that are subject to high levels of foot traffic and other sources of dirt and contamination such as high streets, public squares, around monuments, parks and out-door seating areas of restaurants and coffee shops.

  • CL05-GraniteClean-eco is the most advanced granite cleaner currently available, realised by exploiting the power of nano-technology.

    CL05-GraniteClean-eco returns stained and soiled granite surfaces to their ‘as new’ condition.

    CL05-GraniteClean-eco is a penetrating bio-degradable cleaner specially formulated to extract extreme contamination from Granite and other stone and concrete substrates.

    CL05-GraniteClean-eco works by dissolving and breaking down the structure and surface adhesion of difficult to remove contaminates, such as oil and diesel fuel, irrespective of age.

    CL05-GraniteClean-eco is bio-degradable with minimum environmental impact’ and not subject to Workplace Exposure Limit (WEL) restrictions.

    CL05-GraniteClean-eco is a fast acting answer to surface cleaning, quickly lifting contamination from the surface in a manner that aids ‘safe waste management’, using rinse water.

    CL05-GraniteClean-eco is used to clean pavement subject to high levels of foot traffic and other sources of dirt and contamination. Examples of use are high streets, public squares, around monuments, parks and out-door seating areas of restaurants and coffee shops.

    Epicuro HBG-HD gives effective and durable protection for surfaces following cleaning with CL05-GraniteClean-eco.
    • Unique granite surface cleaner
    • Cleans previously impossible staining.
    • Highly efficient & cost effective.
    • Extracts oil and fuel staining
    • Diluteable & easy to apply.
    • Fast acting product
    • Use also on concrete and all types of stone.
    • Single component, dilute or ready-to-use.
    • Water soluble, bio-degradable cleaner.
    • Density: 1.10kg/Ltr
    • Freezing Point: -4°C.
    • Damage if frozen: None.
    • Boiling Point: 99°C.
    • Clean-up substance: Water.
    • Colour: Transparent Cloudy
    • Odour: Like caustic.
    • Toxicity: None
    • Flammability: Non-flammable.
    • Fumes in use: None.
    • Environmental hazards: None.
  • SURFACE PREPARATION

    Ensure surface is free of all coatings, coverings or materials that could prevent proper application and penetration of the product.

    Effectively protect all aluminium fixtures or other metal fittings, especially when using the product neat or at high concentration (can affect surface). Test the product on the target surfaces before wide scale use, especially if the surface material is unknown (seek advice from Epicuro Ltd).

    APPLICATION

    CL05-GraniteClean-eco is suitable for use on both horizontal and vertical surfaces.

    Prepare CL05-GraniteClean-eco to the required concentration (neat or diluted), following possible testing on the surface to be treated. Use neat or down to 50% concentration (1:2 dilution of product to water).

    For optimum productivity and economy in large scale projects, the dilution level is best determined by trial and error. For heavy soiling, apply neat CL05-GraniteClean-eco evenly on the surface at a dosage rate of 4 sqm/ltr, by brush or spray.

    In the case of more moderate contamination, dilute down to no less than 50% concentration. If required, agitate the product on the surface using with stiff brush.

    Allow CL05-GraniteClean-eco time to work, penetrating the dirt or grease contamination. Observe progress in stain removal, which can vary from a few seconds to 1 hour, in the case of old, stubborn staining.

    Do not allow product to dry on the surface, top up as necessary. Rinse using a high pressure water jet. For best results, use hot water at approximately 80°C.

    Repeat cleaning, possibly altering product concentration and dwell time, as necessary to achieve the desired result.

    Again, rinse and then vacuum up using a wet & dry vacuum equipment. In confined spaces, use of a low pressure hose and scrubbing brush should be considered. N.B. Never apply neat CL05-GraniteClean-eco to aluminium surfaces because its slight caustic nature (<3,5%) may stain or spoil the surface finish.

    CLEANING EQUIPMENT

    Clean tools and equipment using clean water, immediately following completion of work.
  • ALWAYS KEEP CHEMICALS OUT OF REACH OF CHILDREN AND ANIMALS

    CL05-GraniteClean-eco is classed only as an irritant and, therefore, has low health and safety risks. In addition, it is noncorrosive to most surfaces.

    • Eye protection: If there is a real risk of splashing, wear protective goggles.
    • If swallowed: Do not induce vomiting. Contact a doctor or a specialist.
    • Respiratory protection: Under normal conditions of use where adequate ventilation is available, no special respiratory protection equipment is needed.
    • Hand protection: Wear PVC gloves.
    • Skin protection: Wear overalls. No special protective clothing or skin protection is required under normal conditions of use.

    Where required, product users are responsible for preparing their own COSHH Assessments based on the Material Safety Data Sheets provided by Epicuro Ltd. for its products.
  • Coverage depends on the type of substrate, the nature of it’s contamination and the adopted dilution of the product.

    CONTAMINATION CONCENTRATION
    (%)
    DOSAGE RATE
    (sqm/ltr)
    DWELL TIME
    (mins)
    Heavy >10 (Neat) 1-210-60
    Other 50 2-310-60
    CONTAMINATION : Heavy
    • CONCENTRATION (%): >10 (Neat)
    • DOSAGE RATE (sqm/ltr): 1-2
    • DWELL TIME (mins): 10-60
    CONTAMINATION : Other
    • CONCENTRATION (%): 50
    • DOSAGE RATE (sqm/ltr): 2-3
    • DWELL TIME (mins): 10-60

RELATED CASE STUDIES

Important: The content of this documentation is based on our experience of the product. Epicuro Ltd guarantees the quality of its products, but expressly declines any liability in the event of failure by the user to comply with the recommendations and conditions of use of said products, notably but not exclusively in the event of incorrect application, application by unqualified personnel, use of products not compatible with Epicuro’s products or bad weather conditions. For further information, refer to the safety data sheet.